8 min read
The use of machines, in particular, those with moving parts, expose workers to risks of bodily injuries. The following are...
Checklist
8 min read
14 min read
The purpose of this Scaffold checklist is two-fold: 1) to answer questions to help employers and employees understand the requirements...
10 min read
Hot work operations such as welding, cutting, soldering, and any activities that involve using open flames or excessive heat can...
5 min read
A safety observation report (sometimes known as a “safety card”) collects information about the safety of working conditions observed by...
7 min read
The forklift is one of the most commonly used pieces of equipment on the worksite. These powered industrial trucks are...
6 min read
Suppose you’re in the lifting or rigging industry, construction, or any type of general industry where your employees are working...
5 min read
Why are incentives and rewards important? Incentives and rewards for employees and workers are just one of the ways in...
6 min read
Rig Check was developed by the National Institute for Occupational Safety and Health (NIOSH) in partnership with safety experts from...
8 min read
A chemical risk assessment involves the identification of chemical hazards in the workplace and recommends controls to reduce exposure and...
5 min read
SELF-INSPECTION. The most widely accepted way to identify hazards in the workplace is to conduct safety and health self-inspections. You can...
6 min read
The Safety task assessment ( STA) and Pre-Task Hazard Assessment ( PTHA) Is an efficient tool, which if utilized Correctly,...
5 min read
Working at height is always dangerous which makes it extremely important to provide a safe way for workers to access...
13 min read
New workers are more vulnerable to getting sick or injured, especially during the first month on the job. To help...
5 min read
What is Internal Auditing? According to the Institute of Internal Auditors, “internal auditing is an independent, objective assurance and consulting...
A workplace inspection is a critical part of a comprehensive safety and health program in which the workplace is examined...
5 min read
Two designated plant supervisors must fully evaluate the equipment and concur that no employee will be injured upon removal of...
Horizontal Lifelines (HLL) can be very effective fall protection solutions in many situations, including situations where other traditional methods are...
2 min read
It is often difficult to know where to start when creating a pre-qualification program. This checklist will hopefully be of...
4 min read
Regular safety inspections are common in almost every industry, both public and private. They ensure compliance in your workforce and...
2 min read
If you have workers at heights, you probably already know that you need to provide adequate fall protection and fall...
2 min read
Inspections of the workplace Formal inspections can take different forms and you and your representatives will need to agree the...
2 min read
There have been numerous recorded incidents where failings by operators have been the major contributing cause of major accidents. Provision...
When working with hazardous substances, materials or energy, organizations are required to prevent or control incidents that have the potential...
2 min read
The ultimate success of a permit-to-work system depends on the awareness of the people carrying out the activity. If they...