We understand that the successful control of lifting operations and safe use of lift equipment requires a high level of management commitment, professional competence, and adequate resources. Fundamental to the success of any Lifting Operation is the fact that it must be accepted by managers, those responsible for lifting operations, and employees prior
to the commencement. These stakeholders must do all that is reasonably practicable to achieve compliance with statutory duties arising from health and safety legislation, Council guidance, and advice.
Lifting of objects generally takes place at construction sites, shipyards, factories, and other industrial situations such as offloading with a forklift truck, containers at a warehouse, or at a
commercial area. Good practice and correct lifting methods can move large objects efficiently, safely, and reduce manual handling operations. Incorrect lifting methods, however, can lead to major accidents and fatalities. The process of carrying out correct and safe lifting operations involves a range of requirements that must be considered during the planning of any lifting operation.
Planning is an essential component in every lifting operation at all workplaces. In line with the
Workplace Safety and Health Act (WSH Act), reducing risk at source is one of the components to improving workplace and worksite safety. To address risk at source, there is a need to look at whom and what creates the risks, every effort should then be made to eliminate or minimize such risks to the lowest possible levels.
While the WSH Act imposes a duty on the occupiers, employers, and principals of a workplace, the risks inherent in the planning of all lifting activities are required to be addressed, with mitigating actions identified and implemented. Additionally, accidents are often a result of either poor planning or lack of communication between or among stakeholders, this sometimes resulting in loss of vital information that is fundamental to the safety of the operation. The process to ensure transfer and communication of all relevant information and documents is therefore recorded in the Lifting Plan. Essentially, No Plan – No Lift!
(Learn More: Lift plan form )
It is essential that a survey be conducted to establish what the load to be lifted is, what all the characteristics are, weight, size, type of lifting lugs, etc., what the ground conditions are, where it has to be lifted from and to, what the access route is like, etc. The survey must be completed by a competent person(s).
Also, Competent Persons shall ensure all configuration of lifting Operation Physically using Liftplan audit checklist below to avoid any missing or mistakes could occur at paper works and drawings the checklist include the following Main Items:
- Lifting team and lifting machine
- Drawings /Sketches
Persons who have been appointed or been given the responsibility for planning to lift operations should have sufficient technical, practical, and theoretical training, knowledge, and experience of the work they are likely to safely plan /assess the lift. They shall:
- Be capable of identifying the hazards and risks associated with lifting operations within their area of work or the environment where the lifting operation will take place.
- Be able to select the correct lifting equipment for the work. Understand the characteristics of the lifting equipment they are selecting and the nature of the work it will be carrying out.
- Carry out and document risk assessments (lifting operation) or site surveys; have the ability to communicate their findings to those involved in and affected by the lifting operations.
- Be able to create method statements or lifting plans and implement safe systems of work for lifting operations.
- Where appropriate seek additional support and expertise including the use of external specialists to assist them with the planning of lifting operations.
( Learn More: Critical lifts ).
Download the Checklist
- Camp Inspection form
- Machines Access Control Inspection Checklists
- Lift Plan Form
- Slips,Trips and Falls checklist
- Emergency Drill Table Top meeting Form
- Emergency Drill After Action Review form
- Compressed Gas Cylinders Access Control Inspection Checklist
- Competent Person Designation form
- Contractor Weekly HSE Report Form
- Safety Inspection Form
- Incident Report Form
- Job Hazard Analysis form
- OSHA Inspection Checklist 8-Pages
- Process Safety Management (PSM) Compliance checklist
- Portable Ladder Self Inspection checklist
- Scaffold Register and Inspection Checklist
- CRANE INSPECTION REPORT
- Laboratory Inspection Checklist Form
- Electric Arc Welding and Cutting Checklist
- Crane Suspended Personnel Platform (MANBASKET) Permit
- Pressure Testing Checklist
- Hygiene and Sanitation Inspection Checklist
- Permit to Work (PTW ) AUDIT CHECKLIST
- Equipment Safe Operating Procedures- SOP 61 checklist
- Construction safety Inspection checklist
- Fall safety at construction checklist
- Contractor Pre-qualification Questionnaire Checklist
- Lifeline & Harness Inspection Guide checklist
- Templates: Management of Change NEW Modified Equipment Safety Checklist
- Lock Removal Form
- Workplace Safety Inspections Forms
- Safety Templates: COVID-19 Safety Plan
- Construction Site Traffic Management Plan (CSTMP) Guidance
- Fire Pump Daily Inspection Checklist
- Health Safety at Work Improvement Action Plan
- Work at Height Checklist
- Canteen Inspection Checklist
- Electrical Isolation Permit to Work forms and checklist
- Job Safety Analysis (JSA) Forms What’s Right and Wrong?
- Lifting Plan Audit Checklist
- ISO 45001:2018 READINESS CHECKLIST
- Workplace Housekeeping Checklist
- Hazard Identification Checklist
- Pre-Startup Safety Review Checklist (PSSR)
- Ladder Inspection Form
- Hazard Identification Plan (HIP) Template
- HIRA, HSE Hazards & Effects Management Process (HEMP) & Risk Register Template
- Temporary Construction Facilities (TCF) Inspection checklist
- Simultaneous Operation (SIMOPS) checklist
- Mobile Scaffold Inspection checklist
- Annual Internal Audit Form
- General Safety Guidelines and Employee Acknowledgment form
- E-Books: Fire Safety Logbook templates
- Electrical Inspection Checklists
- Grating-Decking-Floor- handrail-Removal Form
- Photo of the day: New worker Orientation & Safety Orientation checklist