A workplace housekeeping checklist is a tool used to ensure that the workplace is well organized, hygienic, and safe for all employees. Good housekeeping prevents workplace hazards such as slips, trips, falls, and more. Regular housekeeping in the workplace also improves productivity, boosts morale, and helps employers avoid potential fines for non-compliance.
Why should we pay attention to housekeeping at work?
Effective housekeeping can help control or eliminate workplace hazards. Poor housekeeping practices frequently contribute to incidents. If the sight of paper, debris, clutter, and spills is accepted as normal, then other more serious hazards may be taken for granted.
Housekeeping is not just cleanliness. It includes keeping work areas neat and orderly, maintaining halls and floors free of slip and trip hazards, and removing of waste materials (e.g., paper, cardboard) and other fire hazards from work areas. It also requires paying attention to important details such as the layout of the whole workplace, aisle marking, the adequacy of storage facilities, and maintenance. Good housekeeping is also a basic part of incident and fire prevention.
Effective housekeeping is an ongoing operation: it is not a one-time or hit-and-miss cleanup done occasionally. Periodic “panic” cleanups are costly and ineffective in reducing incidents.
What is the purpose of workplace housekeeping?
Poor housekeeping can be a cause of incidents, such as:
- tripping over loose objects on floors, stairs, and platforms
- being hit by falling objects
- slipping on greasy, wet, or dirty surfaces
- striking against projecting, poorly stacked items or misplaced material
- cutting, puncturing or tearing the skin of hands or other parts of the body on projecting nails, wire or steel strapping
To avoid these hazards, a workplace must “maintain” order throughout a workday. Although this effort requires a great deal of management and planning, the benefits are many.
What are some benefits of good housekeeping practices?
Effective housekeeping results in:
- reduced handling to ease the flow of materials
- fewer tripping and slipping incidents in clutter-free and spill-free work areas
- decreased fire hazards
- lower worker exposures to hazardous products (e.g. dust, vapors)
- better control of tools and materials, including inventory and supplies
- more efficient equipment cleanup and maintenance
- better hygienic conditions leading to improved health
- more effective use of space
- reduced property damage by improving preventive maintenance
- less janitorial work
- improved morale
- improved productivity (tools and materials will be easy to find)
How do I plan a good housekeeping program?
A good housekeeping program plans and manages the orderly storage and movement of materials from point of entry to exit. It includes a material flow plan to ensure minimal handling. The plan also makes sure that work areas are not used as storage areas by having workers move materials to and from work areas as needed. Part of the plan could include investing in extra bins and more frequent disposal.
The costs of this investment could be offset by the elimination of repeated handling of the same material and more effective use of the workers’ time. Often, ineffective or insufficient storage planning results in materials being handled many times and being stored in hazardous ways. Knowing the workplace layout and the movement of materials throughout it will help when planning work procedures.
Worker training is an essential part of any good housekeeping program. Workers need to know how to work safely with the products they use. They also need to know how to protect other workers such as by posting signs (e.g., “Wet – Slippery Floor”) and reporting any unusual conditions.
Housekeeping order is “maintained” not “achieved.” Cleaning and organization must be done regularly, not just at the end of the shift. Integrating housekeeping into jobs can help ensure this is done. A good housekeeping program identifies and assigns responsibilities for the following:
- clean up during the shift
- day-to-day cleanup
- waste disposal
- removal of unused materials
- inspection to ensure the cleanup is complete
Do not forget out-of-the-way places such as shelves, basements, sheds, and boiler rooms that would otherwise be overlooked.
The final step to any housekeeping program is inspection. It is the only way to check for deficiencies in the program so that changes can be made. Examples of checklists include inspecting offices and manufacturing facilities. below you can download a Sample of the housekeeping checklist
What are the elements of an effective housekeeping program?
The maintenance of buildings and equipment may be the most important element of good housekeeping. Maintenance involves keeping buildings, equipment, and machinery in safe, efficient working order and in good repair. It includes maintaining sanitary facilities and regularly painting and cleaning walls. Broken windows, damaged doors, defective plumbing, and broken floor surfaces can make a workplace look neglected; these conditions can cause incidents and affect work practices. So it is important to replace or fix broken or damaged items as quickly as possible. A good maintenance program provides for the inspection, maintenance, upkeep, and repair of tools, equipment, machines, and processes.
( Read More:work-site-housekeeping-basics/)
Dust and Dirt Removal
Enclosures and exhaust ventilation systems may fail to collect dust, dirt and chips adequately. Vacuum cleaners are suitable for removing light dust and dirt that is not otherwise hazardous. Industrial models have special fittings for cleaning walls, ceilings, ledges, machinery, and other hard-to-reach places where dust and dirt may accumulate.
Special-purpose vacuums are useful for removing hazardous products. For example, vacuum cleaners fitted with HEPA (high-efficiency particulate air) filters may be used to capture fine particles of asbestos or fiberglass.
Dampening (wetting) floors or using sweeping compounds before sweeping reduces the amount of airborne dust. The dust and grime that collect in places like shelves, piping, conduits, light fixtures, reflectors, windows, cupboards, and lockers may require manual cleaning.
Compressed air should not be used for removing dust, dirt, or chips from equipment or work surfaces.
Employee facilities need to be adequate, clean, and well maintained. Lockers may be necessary for storing employees’ personal belongings. Washroom facilities require cleaning once or more each shift. They also need to have a good supply of soap, towels plus disinfectants, if needed.
If workers are using hazardous products, employee facilities should provide special precautions as needed such as showers, washing facilities, and change rooms. Some facilities may require two locker rooms with showers between. Using such double locker rooms allows workers to shower off workplace contaminants and reduces the chance of contaminating their “street clothes” by keeping their work clothes separated from the clothing that they wear home.
Smoking, eating, or drinking in the work area should be prohibited where hazardous products are handled. The eating area should be separate from the work area and should be cleaned properly each shift.
Floors: Poor floor conditions are a leading cause of incidents so cleaning up spilled oil and other liquids at once is important. Allowing chips, shavings, and dust to accumulate can also cause incidents. Trapping chips, shavings, and dust before they reach the floor or cleaning them up regularly can prevent their accumulation. Areas that cannot be cleaned continuously, such as entranceways, should have anti-slip flooring. Keeping floors in good order also means replacing any worn, ripped, or damaged flooring that poses a tripping hazard.
Walls: Light-coloured walls reflect light while dirty or dark-colored walls absorb light. Contrasting colors warn of physical hazards and mark obstructions such as pillars. Paint can highlight railings, guards, and other safety equipment, but should never be used as a substitute for guarding. The program should outline the regulations and standards for colors.
Maintain Light Fixtures
Dirty light fixtures reduce essential light levels. Clean light fixtures can improve lighting efficiency significantly.
Aisles and Stairways
Aisles should be wide enough to accommodate people and vehicles comfortably and safely. Aisle space allows for the movement of people, products, and materials. Warning signs and mirrors can improve sight-lines in blind corners. Arranging aisles properly encourages people to use them so that they do not take shortcuts through hazardous areas.
Keeping aisles and stairways clear is important. They should not be used for temporary “overflow” or “bottleneck” storage. Stairways and aisles also require adequate lighting.
The best way to control spills is to stop them before they happen. Regularly cleaning and maintaining machines and equipment is one way. Another is to use drip pans and guards where possible spills might occur. When spills do occur, it is important to clean them up immediately. Absorbent materials are useful for wiping up greasy, oily or other liquid spills. Used absorbents must be disposed of properly and safely.
Tools and Equipment
Tool housekeeping is very important, whether in the tool room, on the rack, in the yard, or on the bench. Tools require suitable fixtures with marked locations to provide an orderly arrangement. Returning tools promptly after use reduces the chance of them being misplaced or lost. Workers should regularly inspect, clean, and repair all tools and take any damaged or worn tools out of service.
The regular collection, grading, and sorting of scrap contribute to good housekeeping practices. It also makes it possible to separate materials that can be recycled from those going to waste disposal facilities.
Allowing the material to build upon the floor wastes time and energy since additional time is required for cleaning it up. Placing scrap containers near where the waste is produced encourages orderly waste disposal and makes collection easier. All waste receptacles should be clearly labeled (e.g., recyclable glass, plastic, scrap metal, etc.).
Good organization of stored materials is essential for overcoming material storage problems whether on a temporary or permanent basis. There will also be fewer strain injuries if the amount of handling is reduced, especially if less manual material handling is required. The location of the stockpiles should not interfere with work but they should still be readily available when required. Stored materials should allow at least one meter (or about three feet) of clear space under sprinkler heads.
Stacking cartons and drums on a firm foundation and cross tying them, where necessary, reduces the chance of their movement. Stored materials should not obstruct aisles, stairs, exits, fire equipment, emergency eyewash fountains, emergency showers, or first aid stations. All storage areas should be clearly marked.
Flammable, combustible, toxic and other hazardous materials should be stored in approved containers in designated areas that are appropriate for the different hazards that they pose. Storage of materials should meet all requirements specified in the fire codes and the regulations of environmental and occupational health and safety agencies in your jurisdiction.
Download the Checklist
This checklist provides the basic requirements for workplace housekeeping. Should a “No” be recorded for any of the below checklist items, immediate follow-up action is necessary to remove the unsafe condition to prevent its reoccurrence. This checklist is non-exhaustive, and users are recommended to make the necessary customization to suit your work processes and conditions at the workplace.
- Camp Inspection form
- Machines Access Control Inspection Checklists
- Lift Plan Form
- Slips,Trips and Falls checklist
- Emergency Drill Table Top meeting Form
- Emergency Drill After Action Review form
- Compressed Gas Cylinders Access Control Inspection Checklist
- Competent Person Designation form
- Contractor Weekly HSE Report Form
- Safety Inspection Form
- Incident Report Form
- Job Hazard Analysis form
- OSHA Inspection Checklist 8-Pages
- Process Safety Management (PSM) Compliance checklist
- Portable Ladder Self Inspection checklist
- Scaffold Register and Inspection Checklist
- CRANE INSPECTION REPORT
- Laboratory Inspection Checklist Form
- Electric Arc Welding and Cutting Checklist
- Crane Suspended Personnel Platform (MANBASKET) Permit
- Pressure Testing Checklist
- Hygiene and Sanitation Inspection Checklist
- Permit to Work (PTW ) AUDIT CHECKLIST
- Equipment Safe Operating Procedures- SOP 61 checklist
- Construction safety Inspection checklist
- Fall safety at construction checklist
- Contractor Pre-qualification Questionnaire Checklist
- Lifeline & Harness Inspection Guide checklist
- Templates: Management of Change NEW Modified Equipment Safety Checklist
- Lock Removal Form
- Workplace Safety Inspections Forms
- Safety Templates: COVID-19 Safety Plan
- Construction Site Traffic Management Plan (CSTMP) Guidance
- Fire Pump Daily Inspection Checklist
- Health Safety at Work Improvement Action Plan
- Work at Height Checklist
- Canteen Inspection Checklist
- Electrical Isolation Permit to Work forms and checklist
- Job Safety Analysis (JSA) Forms What’s Right and Wrong?
- Lifting Plan Audit Checklist
- ISO 45001:2018 READINESS CHECKLIST
- Workplace Housekeeping Checklist
- Hazard Identification Checklist
- Pre-Startup Safety Review Checklist (PSSR)
- Ladder Inspection Form
- Hazard Identification Plan (HIP) Template
- HIRA, HSE Hazards & Effects Management Process (HEMP) & Risk Register Template
- Temporary Construction Facilities (TCF) Inspection checklist
- Simultaneous Operation (SIMOPS) checklist
- Mobile Scaffold Inspection checklist
- Annual Internal Audit Form
- General Safety Guidelines and Employee Acknowledgment form
- E-Books: Fire Safety Logbook templates
- Electrical Inspection Checklists
- Grating-Decking-Floor- handrail-Removal Form
- Photo of the day: New worker Orientation & Safety Orientation checklist
- Suspended Scaffold Pre-Operation Inspection Checklist