The use of a crane suspended personnel platform (manbasket) is prohibited unless there is no safer, practical, conventional means of access to an elevated work area. Ladders, scaffolds, stairways, aerial lifts and personnel hoists must be considered before using a crane to hoist personnel. If these options are more hazardous
Inspection
Welding safety checklists are tools used to ensure the safety of workers throughout the entire welding cutting and brazing process. Welding checklists can help ensure compliance with wearing appropriate Personal Protective Equipment (PPE) and be used for welding equipment and machinery inspections. They can also be used when performing site
Each lab should conduct regular self-inspections of their areas to ensure compliance with applicable regulatory requirements and to familiarize new staff with the location of safety equipment. Environmental Health and Safety is continuing to inspect all labs on work places . The inspections will cover general safety, chemical safety, hazardous
Prior to initial use, all new and altered cranes should be inspected to determine if any safety hazards exist. Thereafter, inspections should be performed at intervals according to the following list. Some components require daily inspection, while others need only be checked on a monthly basis. A complete inspection should
A scaffold inspection checklist should be used to identify installation oversights and equipment defects of a scaffold. These checklists should carry out critical and thorough evaluation of the scaffold’s strength, rigidity, stability, and should pass the regulatory standards. Know how to conduct better inspections by downloading this collection of scaffold checklists
This checklist is intended to be used as a self-inspection checklist for portable ladders. It is based on NIOSH's "Portable Ladders for Construction Self-Inspection Checklist," According to NIOSH, the checklist "covers regulations issued by the U.S. Department of Labor, Occupational Safety and Health Administration (OSHA) under the construction standards 29
Process safety management (PSM) is a systematic analytical tool for preventing the release of highly hazardous chemicals (as defined by OSHA). Hazardous chemicals include toxic, reactive, explosive and highly flammable liquids and gases. It is a comprehensive management that aims to decrease the number and severity of incidents relating to
The Epstein Becker & Green law office has prepared an 8-page OSHA Inspection Checklist. It’s a resource you can use to help prepare for an OSHA inspection. It has six sections that cover: Preparation before an OSHA inspection Preliminary inspection issues and opening Document production Walkaround inspection Employee interviews Closing citations &
For inspections and audits in the workplace, Safety Culture iAuditor, streamlines the process saving you time - and lives. Easily build your own inspection forms using our simple drag-and-drop builder. Complete inspections on any device, even when you’re offline. Send instantly generated reports to management or customers. Identify trends and
To keep your crew safe, a daily inspection process should be done (See Sample Daily Inspection Form), but a more thorough inspection should also be done at least once per week. In order to help with accountability, the form below is a great item to have all your managers complete and bring to your
This guide line enable you To establish minimum requirements regarding the site tools and Equipment inspection are available for use or used at construction site work places and to clarify the responsibilities for the provision of construction plant and equipment to the work site and to ensure that it is maintained
During Construction Projects each contractors and it's subcontractors is obligated to report all HSE Records and events in weekly Basis to the owner and that's to comply with contract's obligation and help to analyzed all incident, events which took place at the period of the project to figure out the area