Forms

Worker safety is of utmost importance in any industry. To ensure the well-being of employees,…

The storage and use of flammable and combustible liquids pose significant risks in the workplace….

Any activity that involves the lifting or lowering of a load using equipment such as…

Workplace injuries cost employers billions in insurance claims, lost productivity, government fines, and lawsuits every…

ISO 14001 is an internationally agreed standard that sets out the requirements for an environmental…

Walking and Working Surfaces can be stairs, platforms, ramps, floors, and other surfaces where you…

Having an efficient workshop can be one of the most cost-effective ways of maintaining plants…

Industrial ergonomics is concerned with adapting the requirements of a job to the physical needs…

When working with a safety checklist, it is important to personalize the safety checklist by…

The use of machines, in particular, those with moving parts, expose workers to risks of…

The purpose of this Scaffold checklist is two-fold: 1) to answer questions to help employers…

Hot work operations such as welding, cutting, soldering, and any activities that involve using open…

A safety observation report (sometimes known as a “safety card”) collects information about the safety…

The forklift is one of the most commonly used pieces of equipment on the worksite….

If you’re in the lifting or rigging industry, construction, or any type of general industry…

Why are incentives and rewards important? Incentives and rewards for employees and workers are just…

Rig Check was developed by the National Institute for Occupational Safety and Health (NIOSH) in…

A chemical risk assessment involves the identification of chemical hazards in the workplace and recommends…

SELF-INSPECTION. The most widely accepted way to identify hazards in the workplace is to conduct safety…

The Safety task assessment ( STA) and Pre-Task Hazard Assessment ( PTHA) Is an efficient…

Working at height is always dangerous which makes it extremely important to provide a safe…

New workers are more vulnerable to getting sick or injured, especially during the first month…

The removal of flooring or decking on elevated structures during construction works have a high…

The forms today contain 77 electrical inspection checklists taken from the 2014 Electrical Inspection Manual…

The Regulatory Reform (Fire Safety) Order 2005 (RRFSO), which extends to non-domestic premises and the…

The main goal of safety and health programs is to prevent workplace injuries, illnesses, and…

More Forms

Mobile tower scaffolds are often used for painting and maintenance jobs both inside and outside…

The purpose of any Simultaneous Operations (SIMOPS) Procedure is to provide all personnel from the…

Site layout planning consists of identifying the facilities needed to support construction operations, determining their…

The objective of the Hazard Identification Risk Assessment (HIRA) is to identifying and assessing the…

One of the “root causes” of workplace injuries, illnesses, and incidents is the failure to…

The first step in ensuring that roofing professionals utilize ladders safely and effectively on the…

The term Pre-startup Safety Review (PSSR) first received prominence in the process industries with the introduction of…

Hazard identification is the process of detecting potential sources of harm or damage from doing…

A workplace housekeeping checklist is a tool used to ensure that the workplace is well…

ISO 45001:2018 is an international standard for the Occupational Health & Safety (OH&S) management system….

We understand that the successful control of lifting operations and safe use of lift equipment…

Any Marine worth their salt wouldn’t go into battle without a plan that includes training,…

Electrical Isolation means the disconnecting of the electrical supply to electrical installation, appliance, machinery, plant…

Corporate cafeterias and canteens are either run by the Corporate or are outsourced to a…

Working at height remains one of the biggest causes of fatalities and major injuries. Common…

Organizations desire to continuously upgrade their health and safety improvement. Improvement in health and safety…

Your fire pump is the Heart of your fire protection System A booster Pump Reinforces…

The Construction Site Traffic Management Plan or CSTMP has been developed to help the Project…

Employers are required to develop a COVID-19 Safety Plan that outlines the policies, guidelines, and…

A workplace inspection is a critical part of a comprehensive safety and health program in…

Two designated plant supervisors must fully evaluate the equipment and concur that no employee will...

This Production Management of Change (PMOC) procedure is intended to apply to new equipment installations,...

Horizontal Lifelines (HLL) can be very effective fall protection solutions in many situations, including situations...

It is often difficult to know where to start when creating a pre-qualification program. This...

If you have workers at heights, you probably already know that you need to provide...

Inspections of the workplace Formal inspections can take different forms and you and your representatives...

There have been numerous recorded incidents where failings by operators have been the major contributing...

The ultimate success of a permit-to-work system depends on the awareness of the people carrying...

A sanitary inspection is an on-site inspection and evaluation by qualified individuals of all conditions,...

Pressure tests are performed to ensure the safety, reliability, and leak tightness of pressure systems....

The use of a crane suspended personnel platform (manbasket) is prohibited unless there is no...

Welding safety checklists are tools used to ensure the safety of workers throughout the entire...

Each lab should conduct regular self-inspections of their areas to ensure compliance with applicable regulatory...

Prior to initial use, all new and altered cranes should be inspected to determine if...

A scaffold inspection checklist should be used to identify installation oversights and equipment defects of...

This checklist is intended to be used as a self-inspection checklist for portable ladders. It...

Process safety management (PSM) is a systematic analytical tool for preventing the release of highly...

The Epstein Becker & Green law office has prepared an 8-page OSHA Inspection Checklist.  It’s a resource...

The Job Hazard Analysis form helps you identify the hazards of a specific task. After the hazards are...

It is important to develop a strong culture of incident reporting, no matter how minor,...

To keep your crew safe, a daily inspection process should be done (See Sample Daily Inspection Form),...

During Construction Projects each contractors and it's subcontractors is obligated to report all HSE Records...

"Competent person" is defined as "one who is capable of identifying existing and predictable hazards...

At construction work sites any the Access control shall be implemented on Compressed Gas cylinders...

After Completion of the Emergency Test drill as per adopted plan a review for the...

Before starting Emergency Exercise drill a preparation meeting shall be held by all participant of...

Prevention of Slips, Trips, and Falls is major point of emphasis for employers across a...

All crane/lifting operations must have some form of documents, from the simple lifting operations where...

Machines Access Control Inspection Checklists Machines Access Control Inspection Checklists established to be used and...

Camp inspection shall be carried out on regular bases during the construction work activity to...