10 min read
The sounds of heavy construction equipment rumble across active work zones along roadways. In 2019, more than 26,000 crashes, resulting...
10 min read
9 min read
Load Restraint Guide's cover Load Restraint Guide is a Guideline and Performance Standard for the Safe Carriage of Loads on...
9 min read
Incident rates such as LTIR indicate not just the number of incidents that have occurred but also how severe they...
12 min read
Mobile elevating work platforms (MEWPs) are useful but complex pieces of equipment that are often used for access in hazardous...
10 min read
Presenting good food is not the sole purpose of a kitchen. A good kitchen must also be kept clean and...
7 min read
Several recent fires in high-rise buildings have awakened renewed interest in fire safety on the part of the public, and...
7 min read
The terms cement and concrete are often used interchangeably, but cement is an ingredient in concrete. Cement is manufactured through...
10 min read
Compressed gas cylinders are a common fixture in research laboratories. As such it is imperative to understand the safe handling, transportation,...
7 min read
Hazardous materials can be found in every community. They are in almost every home and in most hospitals and factories....
8 min read
Understanding the forklift stability triangle is essential for workplace safety. When workers understand their vehicle’s capacity limits and the general principle...
6 min read
Essential Practices for Process Safety CultureBook's cover Essential Practices for Creating, Strengthening, and Sustaining Process Safety Culture by American Institute...
6 min read
working with a chainsaw involves many different work situations with both simple and more complicated steps. The chainsaw is a...
7 min read
The goal of this Accident Investigation Safety Training Program is to introduce basic principles and analysis techniques for investigating workplace...
7 min read
Workers in industries such as construction, manufacturing, and transportation can avoid workplace accidents by taking the appropriate safety precautions. However, despite...
8 min read
Hand accidents account for between 40% to 60% of recordable workplace accidents each year.1 Yet, knowing how to best protect...
8 min read
Improper lifting technique can lead to back, leg, and arm pain. Poor technique can cause both acute injury and serious long-term effects. Learning the right way...
4 min read
Done right, safety meetings are an opportunity to proactively address potential hazards and issues within your organization. And, they're a...
7 min read
Fault tree analysis (FTA) is a graphical tool to explore the causes of system-level failures. It uses boolean logic to...
7 min read
Grain handling workers face severe dangers of suffocation, falling, entanglement, fires, explosions, electrocutions, and injuries from improperly guarded machinery. These...
6 min read
Fire can race through a structure in a matter of minutes, threatening the lives of that inside and leaving a...
9 min read
Burns and scalds are damage to the skin usually caused by heat. Both are treated in the same way. A burn...
5 min read
System Safety Engineering and Risk Assessment Book's cover System Safety Engineering and Risk Assessment A Practical Approach, Second Edition by...
9 min read
The Hazard Analysis and Critical Control Point (HACCP) food safety management system is a preventive risk assessment tool operated by...
4 min read
Dehydration is a loss of fluids and electrolytes – minerals such as sodium, calcium, and potassium – that the body...