4 min read
Safety Culture and High-Risk Environments A Leadership Perspective by Cindy L. Caldwell. This book is written for the leader who...
Downloads
4 min read
4 min read
The Practical Guide to Industrial Safety - Methods for Process Safety Professionals by Nicholas P. Cheremisinoff. This book has been...
4 min read
Many operators and laboratory staff are frequently exposed to chemicals that, if not handled properly, can cause severe harm or...
6 min read
Slip, Trip, and Fall Prevention for Healthcare Workers book emerged from a multi-institutional, multi-disciplinary research partnership including NIOSH, BJC Health...
12 min read
Lockout and Tagout (LOTO) is a set of procedures that are used to ensure that equipment is shut down, inoperable, and (where...
5 min read
Health and Safety at Work Key Terms by JW W Stranks. The book has been written principally as a revision...
3 min read
What happened in this Safety Flash: An electrician installed fuses on a 930V DC electrical system while the system was...
10 min read
Falls are the top workplace danger as recorded by insurance companies and government regulators. Fall protection plans are designed to...
4 min read
Hand grinders are being used more frequently in the water utility industry, typically with jobs involving fabrication, mechanical, contracting, masonry,...
5 min read
A safety observation report (sometimes known as a “safety card”) collects information about the safety of working conditions observed by...
4 min read
Fundamentals of Process Safety Engineering 2021 SK Biswas. This book contains a great deal of technical detail, of which all...
4 min read
Anyone who operates, cleans, services, adjusts, and repairs machinery or equipment should be aware of the hazards associated with that...
5 min read
Whether it’s snow, sleet, or ice, winter weather can cause extremely dangerous road conditions. In 2019, there were 440 fatal...
7 min read
The forklift is one of the most commonly used pieces of equipment on the worksite. These powered industrial trucks are...
5 min read
Gas Detection Handbook is a reference guide for customers considering using fixed or portable gas detectors. It provides both basic...
4 min read
Every year heavy equipment operators, ground workers, and pedestrians are injured or killed by heavy mobile equipment used in construction....
4 min read
Occupational health and safety management systems ANSI-AIHA-z10-2012 is a voluntary consensus standard on occupational health and safety management systems. It...
4 min read
This booklet describes the safety procedures that should be followed by anyone who plans to do hot work — that...
3 min read
Introduction-Rotary hammers and hammer drills are designed to drill into concrete, brickwork, and hard masonry of all types. They perform...
6 min read
Suppose you’re in the lifting or rigging industry, construction, or any type of general industry where your employees are working...
3 min read
What happened The drilling crew was tripping the drill string into the primary well with two floormen positioned in the...
4 min read
Human Fatigue Risk Management Improving Safety in the Chemical Processing Industry by Matthew, S Thimgan. The book starts with a very succinct...
5 min read
Why are incentives and rewards important? Incentives and rewards for employees and workers are just one of the ways in...
Guidelines for the provision of facilities and general safety in the construction industry provide general guidance on how to keep...