6 min read
The goal for every employee working at height is to make it home safely at the end of every shift....
Construction
6 min read
5 min read
THIS Confined Space Guide has been developed to explain the hazards of confined space work and to assist employers in...
8 min read
Harnesses are a critical piece of “personal fall protection,” and full-body harnesses are approved for use in: Fall arrestPositioningConfined space rescueLadder...
8 min read
In December 2021, a concreter suffered serious injuries including a cervical spinal fracture and lacerations to his head and body...
8 min read
Overhead power lines cause 40% of all electrically related fatalities, in the workplace. A majority of these accidents occur with...
10 min read
Hot work operations such as welding, cutting, soldering, and any activities that involve using open flames or excessive heat can...
12 min read
Health and safety officers are vitally important to larger companies, especially those involved in manufacturing and oil and gas. Not...
9 min read
Harmful substances in transported goods, or chemicals used to fumigate containers can make workers inspecting or unpacking those containers sick....
6 min read
The safe storage of hazardous chemicals is an essential part of Workplace safety. Chemical storage is complex there is no...
9 min read
The proper and safe operation of cranes mainly falls to the operator. This means that both operators and managers must...
4 min read
Many operators and laboratory staff are frequently exposed to chemicals that, if not handled properly, can cause severe harm or...
9 min read
Automotive batteries contain hydrogen-oxygen gases that can be explosive. The acid inside the battery is highly corrosive and can cause...
12 min read
Lockout and Tagout (LOTO) is a set of procedures that are used to ensure that equipment is shut down, inoperable, and (where...
5 min read
Health and Safety at Work Key Terms by JW W Stranks. The book has been written principally as a revision...
3 min read
What happened in this Safety Flash: An electrician installed fuses on a 930V DC electrical system while the system was...
10 min read
Falls are the top workplace danger as recorded by insurance companies and government regulators. Fall protection plans are designed to...
4 min read
Hand grinders are being used more frequently in the water utility industry, typically with jobs involving fabrication, mechanical, contracting, masonry,...
5 min read
A safety observation report (sometimes known as a “safety card”) collects information about the safety of working conditions observed by...
4 min read
Anyone who operates, cleans, services, adjusts, and repairs machinery or equipment should be aware of the hazards associated with that...
5 min read
Job safety has come a long way in 50 years since the Occupational Safety and Health Act (OSH Act) was...
4 min read
While ladder manufacturers strive to produce the safest ladders possible, a well-made ladder is not enough. This video discusses the...
5 min read
Whether it’s snow, sleet, or ice, winter weather can cause extremely dangerous road conditions. In 2019, there were 440 fatal...
9 min read
How Do the Counterweights in Tower Cranes Work? Did you ever think about this question? We mostly take for granted...
7 min read
The forklift is one of the most commonly used pieces of equipment on the worksite. These powered industrial trucks are...