The purpose of the Handbook of Training in Mine Rescue and Recovery Operations is to provide a guide for the training of the members of mine rescue teams in the care and use of apparatus for protection in irrespirable atmospheres, in the detection of noxious gases, specialized emergency response equipment, and in general knowledge of…
LEEA’s Code of Practice for the Safe Use of Lifting Equipment (COPSULE) provides expert guidance on safe lifting practice. The ninth edition was published in November 2019. Comprehensive guidance Easy to use – full index for quick reference Authoritative – written by industry experts Up to date – revised to incorporate current industry practice Globally…
What happened For the purpose of a rescue at height drill, a person on the main deck suspended himself 1,5 meters from the deck in a safety harness with a ladder stand-by, while crew gathered on the bridge. After contacting the crew on the bridge by radio the person in the safety harness stepped on…
This best practices guideline provides practical guidance to help employers fulfill their obligations to protect the health and safety of workers who operate or work around forklifts. This best practices guideline was created with the help of a multi-stakeholder advisory committee that drew on its experience in forklift truck health and safety. The advisory committee…
Workplace health and safety are both the moral and legal responsibilities of most employers. Whether you’re working in an office or in a manufacturing warehouse, any type of workplace has its share of hazards. It is important for employers to thoroughly assess and effectively address each issue. This means performing a job safety analysis, providing education…
Handbook of Hazardous Chemical Properties by Nicholas P. Cheremisinoff. This volume has been prepared as a reference source on the hazardous properties of industrial and consumer chemicals. It is designed to assist chemical handling specialists, emergency responders, and health and safety engineers, and technicians in the safe handling and shipping practices of chemicals. The reader should first…
Human Performance Improvement through Human Error Prevention is a Comprehensive Implementation Guide for Protecting Employees and Maintaining Cost Efficiency This book is a simulation of a live course.There are seven major sections of the book: Major Learning Objectives; Introduction; 1st Field of Focus, Hazards, and Barriers; 2nd Field of Focus, Error Traps and Counteracting Behaviors;…
Rig Check was developed by the National Institute for Occupational Safety and Health (NIOSH) in partnership with safety experts from the oil and gas extraction industry. It is made up of 35 inspection forms. The forms are designed to be used by rig workers to document the inspection of tools and equipment commonly found on…
Principles Of Fire Risk Assessment In Buildings by David Yung. This book has been prepared as a reference source for fire safety professionals working in the fire risk assessment field. It is also intended as a textbook for university students in fire protection engineering. It is my hope that it will serve both fields well….
Investigation of Occupational Accidents and Diseases Is a Practical Guide for Labour Inspectors designed to equip labour inspectors with the necessary skills to conducteffective investigations into occupational accidents, occupational diseases, and other undesired events (such as dangerous occurrences and near-miss/incidents) that could have led to personal injuries affecting workers or members of the public. It…
Merriam-Webster defines “training” as the skill, knowledge, or experience acquired by one that trains. Specifically, “safety training” is for employees or even individuals working within the industrial and/or construction industries. OSHA states that education and training provide employers, managers, supervisors, and workers with: Knowledge and skills are needed to do their work safely and avoid…
Work-related asthma is the most common occupational respiratory disorder in industrialized countries. It creates a narrowing of the air passages that makes it difficult to breathe. Symptoms are typically worse on working days and improve when away from work. Early and accurate diagnosis, plus changes in the workplace, can make a difference to the well-being…
This Safety Report summarizes the good and current state-of-the-art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information for Regulatory Authorities, operating organizations,workers, equipment manufacturers, and client organizations, with the intention of explaining their responsibilities and means to enhance radiation protection and safety in industrial radiography. The use…
Heavy equipment is a necessity on nearly every construction project. Unfortunately, they can be extremely dangerous when not used properly. Rollovers, struck-by accidents, and caught in or between accidents are common ways workers can be injured when working on or near heavy equipment. The Photo of today and infographic show the top 5 safety tips…
A chemical risk assessment involves the identification of chemical hazards in the workplace and recommends controls to reduce exposure and minimize harm to workers. It assesses the transport, storage, and handling of hazardous substances so pre-emptive action can be taken to reduce harm. The identification of hazards, the evaluation of their risks, and the putting…
People who work outdoors are vulnerable to the sun’s rays. Exposure to ultraviolet radiation (UV) can cause sunburn, premature skin ageing, eye damage, and skin cancer. Skin cancer is the most common cancer in many workplaces and the rate continues to rise, yet it is one of the most preventable. The photo of today and…
This book provides guidance on including prevention through design concepts within an occupational safety and health management system. Through the application of these concepts, decisions pertaining to occupational hazards and risks can be incorporated into the process of design and redesign of work premises, tools, equipment, machinery, substances, and work processes including their construction, manufacture,…
We often think of impairment as a result of substance use or addiction or dependence on alcohol or drugs, whether legal or illegal. However, impairment can be the result of any number of issues, from fatigue to medical conditions, to traumatic shock and life events. Regardless of the source, impairment at work can affect our…
Although sitting requires less physical effort than standing or walking, it puts stress on the lumbar area. Over time, the effects of a sedentary lifestyle combined with a job that requires sitting can lead to various health problems, including musculoskeletal disorders (MSDs). Learning and practicing how to sit properly can reduce stress and strain on…
Power outages are common during disasters, and they can last for several days. You can reduce your losses and speed the recovery process with an emergency generator. Portable generators made for household use can provide temporary power to a few appliances or lights. Commercial generators can help prevent service interruptions at businesses and critical infrastructure…
Food Safety Management A Practical Guide for the Food Industry Y. Motarjemi. Food Safety Management: A Practical Guide for the Food Industry is a unique book and a reference for the future. For the first time, it gathers all essential and basic information that managers and professionals need to know about the management of food…
This International Standard establishes design principles for displayed escape plans that contain information relevant to fire safety, escape, evacuation, and rescue of the facility’s occupants. These plans may also be used by intervention forces in case of emergency.These plans are intended to be displayed as signs in public areas and workplaces.This International Standard is not…
Safety at Work, Seventh Edition 7th Edition by John Ridley. A major objective of this book has been to provide an authoritative, up-to-date guide in all areas of health and safety. The contributing authors are recognized specialists in their fields and each has drawn on his or her personal knowledge and experience in compiling the text, emphasizing those facets…
SELF-INSPECTION. The most widely accepted way to identify hazards in the workplace is to conduct safety and health self-inspections. You can only be certain that actual situations exist in the workplace if you check them from time to time. Begin a program of self-inspection in your workplace. Self-inspection is necessary if you are to know where…
Notifications