7 min read
Grain handling workers face severe dangers of suffocation, falling, entanglement, fires, explosions, electrocutions, and injuries from improperly guarded machinery. These...
Construction
7 min read
5 min read
System Safety Engineering and Risk Assessment Book's cover System Safety Engineering and Risk Assessment A Practical Approach, Second Edition by...
9 min read
In almost every industry, a load of some kind is being lifted, manipulated, lowered, or carried in a way that...
8 min read
Most drivers spend less than 1% of their driving time in reverse, yet national statistics indicate that about one-quarter of...
4 min read
Permit-Required Confined Spaces Book's cover Permit-Required Confined Spaces is an informational booklet provides a general overview of a particular topic...
12 min read
Employee participation in any near-miss program is vital, however, it can be challenging to get workers to conform to change...
14 min read
The purpose of this Scaffold checklist is two-fold: 1) to answer questions to help employers and employees understand the requirements...
11 min read
Lifting equipment and accessories are marked for a variety of reasons, the most important of which is to give it...
8 min read
Wearing personal fall protection equipment while working at height, including lanyards and self-retracting lifelines (SRLs), is the key to returning home safely...
11 min read
Welders take pride in their work after all, their welds are visible for all to see. To avoid injury, welders...
6 min read
The goal for every employee working at height is to make it home safely at the end of every shift....
5 min read
THIS Confined Space Guide has been developed to explain the hazards of confined space work and to assist employers in...
Harnesses are a critical piece of “personal fall protection,” and full-body harnesses are approved for use in: Fall arrestPositioningConfined space rescueLadder...
8 min read
In December 2021, a concreter suffered serious injuries including a cervical spinal fracture and lacerations to his head and body...
8 min read
Overhead power lines cause 40% of all electrically related fatalities, in the workplace. A majority of these accidents occur with...
10 min read
Hot work operations such as welding, cutting, soldering, and any activities that involve using open flames or excessive heat can...
12 min read
Health and safety officers are vitally important to larger companies, especially those involved in manufacturing and oil and gas. Not...
9 min read
Harmful substances in transported goods, or chemicals used to fumigate containers can make workers inspecting or unpacking those containers sick....
6 min read
The safe storage of hazardous chemicals is an essential part of Workplace safety. Chemical storage is complex there is no...
9 min read
The proper and safe operation of cranes mainly falls to the operator. This means that both operators and managers must...
4 min read
Many operators and laboratory staff are frequently exposed to chemicals that, if not handled properly, can cause severe harm or...
9 min read
Automotive batteries contain hydrogen-oxygen gases that can be explosive. The acid inside the battery is highly corrosive and can cause...
12 min read
Lockout and Tagout (LOTO) is a set of procedures that are used to ensure that equipment is shut down, inoperable, and (where...
5 min read
Health and Safety at Work Key Terms by JW W Stranks. The book has been written principally as a revision...